Goodwinds
GW - Fiberglass Ferrules - assorted sizes
- UPC:
- fiberglass ferrules
- Gift wrapping:
- Options available
- Shipping:
- Calculated at Checkout
Description
Fiberglass internal and internal ferrules - assorted diameter sizes.
Internal Fiberglass Ferrules are either solid (S) or hollow filament wound epoxy tubes (T) and are inserted inside the ends of two tubes to connect them together. Internal ferrules make a smoother connection that does not have the bulk of an external ferrule. It is helpful to glue the ferrule into one tube.
The lengths of these ferrules may vary about +/- 1/2″.
PLEASE NOTE: The FL-602 ferrules will only fit over .500″ BLACK fiberglass rods due to the nominal outer diameter being a bit smaller than .500″. In order to fit over a .500″ WHITE fiberglass rod, the rod will need to be sanded down.
Related Products
GW - Metal ferrules - assorted sizes
Goodwinds
$1.85 - $13.25
Aluminum ferrules -
Aluminum ferrules are a lightweight method of fitting two short rods or tubes together and creating a longer spar. These ferrules fit sizes .180″ through .625″. Sizes .180” and ...
GWK - Fiberglass Round Rod assorted sizes
Goodwinds
$0.00 - $32.00
Solid Fiberglass Rods
Remarkably flexible, round fiberglass rods are used as framing for a variety of structures like greenhouses, kites, and flag whips. Also known as glass fiber rods, solid...
GWK - Fiberglass Tube FWET
Goodwinds
$12.50 - $32.75
Fiberglass Round Tube FWET
Goodwinds Fiberglass Round Tubes are called Filament Wound Epoxy Tubes because they are created by winding fiberglass filaments around a mandrel (similar to wrapped carbon...
ITB - Fiberglass Ground Mount
In the Breeze
$16.00
Fiberglass Ground Mount
This solid fiberglass ground mount is perfect for securing free-standing poles. Simply pound it into the ground and place your pole over it. Highly recommended for use with...
Prism Designs - Nexus leading edge connector "ferrule" "parts"
Prism Kites
$2.75
Nexus leading edge connector "ferrule" - sold individually per piece
They slide onto your upper and lower spars to connect the leading edge spars together. Not too exciting you say? Just try...
Custom Cutting of Fiberglass and carbon spars
kiteguys
$0.50
Custom cutting of fiberglass and carbon spars.
Inserts for Carbon and fiberglass tube reinforcements
Goodwinds
$6.00
Carbon reinforcements for ends of carbon and fiberglass tube.
Reinforcements inserts are installed into each end of the spar to increase structural strength at the ends.
These are sold per piece...
GW - Spectra Bulk 50# x 100' on cardboard tube
Goodwinds
$34.00
Bulk Spectra flight line 2@ 50# x 100' on cardboard tube. You sleeve and prepare these lines yourself. You will need a card winder.
Jackite - Swivel windsock Extension Arm for Fiberglass Poles
Jackites
$8.50
Windsock Extension Arm for Fiberglass Poles
Keep your Jackite bird kite line from wrapping around your fiberglass flying pole with the Jackite Windsock Arm. Simply slide the white plastic sleeve...