Goodwinds

Fiberglass internal and internal ferrules - assorted diameter sizes. Internal Fiberglass Ferrules are either solid (S) or hollow filament wound epoxy tubes (T) and are inserted inside the ends of...

Aluminum ferrules - Aluminum ferrules are a lightweight method of fitting two short rods or tubes together and creating a longer spar. These ferrules fit sizes .180″ through .625″. Sizes...

Bulk Spectra flight line 2@ 50# x 100' on cardboard tube. You sleeve and prepare these lines yourself. You will need a card winder.

Avia Sport Rounded Nocks Avia Sport kite nocks are designed with rounded tips to prevent the kite nock from getting stuck in the ground when the kite lands on the wing tip. Kite...

Solid Round Carbon Rods Using the same pultrusion process as our carbon tubes, carbon rods are made of unidirectional-oriented carbon fibers and a resin. Solid carbon rods are available as small...

6mm Black Dihedral fitting

Currently we have a good selection of Fiberglass tube and fiberglass rod for kite spar replacement. As well as parts, pieces, fittings and various kite components. Indicate in the notes section,...

Solid Fiberglass Rods Remarkably flexible, round fiberglass rods are used as framing for a variety of structures like greenhouses, kites, and flag whips. Also known as glass fiber rods, solid...

Fiberglass Round Tube FWET Goodwinds Fiberglass Round Tubes are called Filament Wound Epoxy Tubes because they are created by winding fiberglass filaments around a mandrel (similar to wrapped carbon...

Pultruded carbon tubes, also known as graphite tubes or unidirectional carbon fiber tubes, are used in many industrial applications and aerospace designs, as well as in hobbies such as RC...

Sky Shark Tubes Sky Shark P Series Tubes are lightweight wrapped carbon tubes with a brushed, matte finish. Sky Shark P Series Tubes are non-tapered and can be cut anywhere along the straight carbon...

Carbon reinforcements for ends of carbon and fiberglass tube. Reinforcements inserts are installed into each end of the spar to increase structural strength at the ends. These are sold per piece...