Prism Designs - Quantum replacement parts - Spine T- Connector V 2
- SKU:
- pd-Q_S_T_conv2
- UPC:
- MPN:
- Gift wrapping:
- Options available
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$12.00
Was:
— You save
Description
Quantum Spine -T connector and inner bridle. V2
Our newly redesigned Quantum Center-T remains backwards compatible with all existing Quantum's. Easy to install with a new bridle leg included, it’s seriously reinforced to prevent breakage while you’re learning the ropes or pushing the limits in stronger winds.
Related Products

Prism Designs - Nexus replacement parts, "Spine"
Prism Kites
MSRP:
Now:
$10.50
Was:
Nexus Lower Spine
The spine (the rod that runs up and down the back of the kite)
With tricks like The Flapjack, Lazy Susan and Jacob’s Ladder, it’s no surprise that flyers crack up these spars the...

Prism Designs - Jazz replacement parts, "Spine"
Prism Kites
MSRP:
Now:
$10.00
Was:
Jazz Spine
The spine (the rod that runs up and down the back of the kite)

Prism Designs - Quantum replacement parts - "Spine"
Prism Kites
MSRP:
Now:
$14.00
Was:
Quantum Spine
Kite terminology can be a bit confusing at first, but at least there are some parts that are fairly self-explanatory. The spine (the rod that runs up and down the back of the kite)...
Customers Also Viewed

Prism Kites - Nexus Leading edge fitting "parts"
Prism Kites
MSRP:
Now:
$2.75
Was:
Leading Edge Fitting - sold individually per piece
These molded Fittings are where the rubber meets the carbon. Keep your leading edges connected to your spreader spars.

GW - Metal ferrules - assorted sizes
Goodwinds
MSRP:
Now:
$1.85 - $13.25
Was:
Aluminum ferrules -
Aluminum ferrules are a lightweight method of fitting two short rods or tubes together and creating a longer spar. These ferrules fit sizes .180″ through .625″. Sizes...

GW - Fiberglass Ferrules - assorted sizes
Goodwinds
MSRP:
Now:
$1.50 - $5.50
Was:
Fiberglass internal and internal ferrules - assorted diameter sizes.
Internal Fiberglass Ferrules are either solid (S) or hollow filament wound epoxy tubes (T) and are inserted inside the ends of...

Prism Designs - Jazz Stand off retainer fitting "parts"
Prism Kites
MSRP:
Now:
$1.75
Was:
Jazz Standoff Retainer Fittings - sold individually per piece
These fittings retain the stand offs. They slide onto your lower spreader and have a hole for the standoff to go into. Not too exciting...

GWK - WCT Sky Shark P100
Goodwinds
MSRP:
Now:
$21.00
Was:
Sky Shark Tubes
Sky Shark P Series Tubes are lightweight wrapped carbon tubes with a brushed, matte finish. Sky Shark P Series Tubes are non-tapered and can be cut anywhere along the straight carbon...

GWK - Vinyl End Caps
MSRP:
Now:
$0.30 - $0.90
Was:
Vinyl End Caps (VEC) are best known for protecting the ends of your composite tubes and rods. End caps also save your sail fabric from spar abrasion. Vinyl End Caps can be used to slip over wing tip...

GWK - Avia Sport Rounded Nocks
Goodwinds
MSRP:
Now:
$0.75
Was:
Avia Sport Rounded Nocks
Avia Sport kite nocks are designed with rounded tips to prevent the kite nock from getting stuck in the ground when the kite lands on the wing tip. Kite...


Prism Designs - Zenith 5
Prism Kites
MSRP:
Now:
$59.00
Was:
Zenith 5 - High-flying performance with a fresh new look
It’s the next generation of our best selling, high flying 5-foot delta, with a fresh new look and a redesigned wing for...