Carbon Spars

Nexus Spreader   While it is the one part that seems to break least often, this spar does tend to get "misplaced" from time to time. Whatever happened to the original we've got you covered. Fits the Nexus 2.0 as well as the older, 'standard'...

Nexus Upper Leading edge On this kite, the leading edge is divided into two different spars. The top spar is the “Upper” leading edge. Replacement upper leading edges come from Prism cut to the correct length with new ferrules, caps and...

Nexus Lower Leading edge On this kite, the leading edge is divided into two different spars. The bottom spar is the “Lower” leading edge. Replacement lower leading edges come from Prism cut to the correct length with a nock already attached...

Quantum Upper Spreader While it is the one part that seems to break least often, this spar does tend to get “misplaced” from time to time. Whatever happened to the original we’ve got you covered.  

Quantum Standoff Stand offs are all about giving the sail its shape. They’re sold in pairs so you’ll always have a spare.

Jazz Spine The spine (the rod that runs up and down the back of the kite)  

Nexus Lower Spine The spine (the rod that runs up and down the back of the kite) With tricks like The Flapjack, Lazy Susan and Jacob’s Ladder, it’s no surprise that flyers crack up these spars the most. Even if you broke yours crashing into...

Jazz lower Leading edge - sold individually per piece Connects from the upper leading edge of the kite. With tricks like The Flapjack, Lazy Susan and Jacob’s Ladder, it’s no surprise that flyers crack up these spars the most. Even if you...

Jazz Upper Leading edge - sold individually per piece Connects from the lower leading edge of the kite. With tricks like The Flapjack, Lazy Susan and Jacob’s Ladder, it’s no surprise that flyers crack up these spars the most. Even if you...

Jazz Lower Spreader - sold individually per piece Connects from the Center T to the Leading edge of the kite. With tricks like The Flapjack, Lazy Susan and Jacob’s Ladder, it’s no surprise that flyers crack up these spars the most. Even if...

Solid Round Carbon Rods Using the same pultrusion process as our carbon tubes, carbon rods are made of unidirectional-oriented carbon fibers and a resin. Solid carbon rods are available as small as .020” in diameter and as large as .156”...

Pultruded carbon tubes, also known as graphite tubes or unidirectional carbon fiber tubes, are used in many industrial applications and aerospace designs, as well as in hobbies such as RC airplanes and RC sailboats, kite spars in dual line...