Kite Parts

Rev bungi / cap replacement kit

20' Continuous Kite Tail - Tie Dye This tail has no end to what it can do, literally. With clips on both ends of the fabric, connect the tail to both ends of your kite and watch it soar alongside your favorite kite! Features two clips at either...

20# x 300' nylon line on stake winder. Assorted colors

Nexus Spine -T connector and inner bridle.

Nexus Spreader   While it is the one part that seems to break least often, this spar does tend to get "misplaced" from time to time. Whatever happened to the original we've got you covered. Fits the Nexus 2.0 as well as the older, 'standard'...

Carbon reinforcements for ends of carbon and fiberglass tube. Reinforcements inserts are installed into each end of the spar to increase structural strength at the ends. These are sold per piece in 3" lengths.

Jazz Upper Spreader - sold individually per piece Connects from the upper leading edge of the kite. With tricks like The Flapjack, Lazy Susan and Jacob’s Ladder, it’s no surprise that flyers crack up these spars the most. Even if you broke...

4D Spine T connector

Yo-yo spool 50# x 300' Simply the best non-mechanical line winders you can buy. Yo-Yo Winders makeit easy to dispense the line and reel it in quickly. Easy to grip with one hand. Line: Includes 300 ft. 50 lb. Test Line and one yo-yo winder. Yo-yo...

Yo-yo spool 30# x 300' Simply the best non-mechanical line winders you can buy. Yo-Yo Winders makeit easy to dispense the line and reel it in quickly. Easy to grip with one hand. Line: Includes 300 ft. 30 lb. Test Line and one yo-yo winder. Yo-yo...

Nexus Upper Leading edge On this kite, the leading edge is divided into two different spars. The top spar is the “Upper” leading edge. Replacement upper leading edges come from Prism cut to the correct length with new ferrules, caps and...

Nexus Lower Leading edge On this kite, the leading edge is divided into two different spars. The bottom spar is the “Lower” leading edge. Replacement lower leading edges come from Prism cut to the correct length with a nock already attached...